The sabre is an evolution of the European backsword, a straight, single-edged sword with a basket. It often has a slightly curved blade and a quite large knuckle-guard. Cavalry sabres however were straight and two-edged. Originally a 10th century Hungarian cavalry weapon the sabre had its highlight during the 19th century in the Napoleontic Wars and the American Civil War.
The sabre is delivered including a scabbard. Its length if 107 cm with a blade of 92 cm and a width of 3 cm. It weighs 1050 grams. This type of sabre was developed around 1840 in the US for the Dragoons, mounted infantry. The sabre always had a brass grip which was typical for this era. Sabres like this were used by North and South during the American Civil War.
Length: 107 cm;
Blade length: 92 cm;
Blade width at guard: 3 cm;
Weight: 1050 g;
Steel type: EN45 spring steel, hardness 48 HRC;
Tang construction: Full tang construction;
Grip wrapping: Wood, Leather, Brass;
Based on a historic original: Yes;
Transport weight (in gram): 3000 *
This item is semi-sharp and designed for decorative purposes. It can be made razor sharp at a surcharge. When using the sharpening service, the return right and warranty expires. The extra delivery time is approx. 2 weeks.
The blade of this sword can be blunted (2,5-3 mm) at a surcharge of â‚¬70,00. Please note: although the thickness will be the same as a battle-ready sword, the return right and warranty expires when using the blunting service. Please contact us if you wish to use the blunting service, or make a note at the last step of your shopping cart. The extra delivery time is approx. 2 weeks.
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
We do not sell this product to customers under the age of 18. Click here for more information on the European arms acts.
Tip: How to adjust the finish of your armour and weaponry
Luxurious (polished)- polish the steel with metal polish or toothpaste. You can even give the item a mirror-like polish. Test on a small surface first!
Handmade (matte)- soak the steel in cola for 40 minutes to 20 hours. Check regularly and treat with black sandpaper.
Antique (patinated) leave the steel to rust for some time in a damp environment, preferably outside. Remove the red layer of rust, to reveal the corroded top layer.
Please note. After finishing the product yourself, the warranty and return right expire. Celtic WebMerchant is not responsible for the obtained result.