This type of aventail was frequently worn in the Middle Ages combined with for example bascinets. Originals of aventails like this can be found at i.a. the Wallace Collection in London.
This aventail consists of flat rings riveted with wedge rivets and round, butted rings. They are interwoven 4 in 1 and have an inner diameter of 8 mm. The aventail can be attached to a helmet with a 4,5 cm wide leather edge at the upper side. It weighs approx. 2,95 kg.
Length of the leather fastening point: 55 cm;
Steel type: spring steel;
Steel thickness: 1.8 mm;
Inner diameter: 8 mm;
Rivetted: flat rings, wedge rivets;
Weaving method: 4:1 construction;
Weight: 2.95 kg;
Based on a historic original? yes;
Transport weight (gram): 4000 *
Attaching armour & chainmail
To attach your armour or chainmail securely, you can attach leather laces to your gambeson and fasten these to your armour / chainmail. The armour thus remains in position during a fight.
Maintenance & care
Remove rust from your chainmail by rubbing the rings together (just like when hand-washing clothes, but without water). The rings will grind together and the rust will come off.
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Packaged with 100% recycled material
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.