Viking sax with knotwork, with scabbard, semi sharp

When packing this item, we exclusively use 100% recycled plastic and recycled paper/cardboard sourced from FSC certified forests. A large portion of the material we reuse directly without recycling process intervention. Recycle the material by separating your waste.

1. Cardboard: separate or reuse paper.
2. Plastic cushions, garment bags and plastic tape: separate or reuse plastic. Optionally pierce the cushions with a needle for volume reduction.
3. Paper packaging for jewelry and small items: have a plastic inner layer. Remove this, and then separate paper and plastic.

This item is not sold to customers under the age of 18. We verify your age at checkout during the purchase process. Therefore, keep your ID card or passport handy. Your data will not be stored or otherwise processed. If we have previously verified your age, it does not need to be done again.

Tip: how to adjust the finish of plate armor and weapons yourself

Luxury (polished) – polish the steel with metal polish or toothpaste. You can even polish an item to a mirror finish with this. Test on a small area first!

Hand-made (matte) – place the steel in cola for 40 minutes to 20 hours. Regularly check the matte effect. Smooth the finish with black sandpaper.

Antique (patinated) – place the steel in a damp environment (preferably outside) and let it rust. Remove the red layer of rust, leaving the corroded surface layer.

Note. After self-finishing the product, warranty and return rights are void. Celtic WebMerchant is not liable for the effects of the aforementioned methods.

The swords of the first class High are made from high-quality steels, excellently balanced, and carefully hardened to a high degree of hardness. If sharp, these swords are suitable for daily use in cutting tests. If blunt (battle-ready), they are suitable for regular use in HEMA and reenactment. The battle-ready variant features a rounded tip and has a blade thickness of 2–3 mm.

Note: swords of this class also wear. The formation of burrs is a normal form of wear. Always check your weapon for burrs before use and remove them if necessary.

• Hardness of the blade at least 50 HRC.
• Blade runs fully through the grip.
• Pommel is riveted to the blade or soldered.
• Light and very maneuverable with an excellently balanced center of gravity.

The animal parts in this article are made from animals that were caught in the wild, or animals that were killed during pest control due to the lack of a natural predator, such as possums.