During the American Civil War (1861-1865) sabers were produced directly on American territory, but they were also imported en masse from Europe. As a result, there is a wide variation in the sabers used by both Union and Confederate soldiers during the Civil War. This reproduction is based on a popular type of French sabers used on both sides of the war. Both officers and regular soldiers used this saber.
This saber has a peened pommel. The guard and pommel are made of gold-colored brass and have a light patina layer to achieve an antique effect. The grip is made of wood with black leather wrapping and twisted brass wire. The saber is delivered including a steel scabbard with suspension rings.
Material: EN45 spring steel, leather, wood, steel, brass
Length: 106 cm
Blade thickness: upper third towards the tip is 1 mm thick (semi-sharp), for decorative use only. The rest of the blade is 4 mm thick.
Blade length: 90 cm
Grip length: 10 cm
Max. blade width: 3 cm
Point of balance: approx. 17,8 cm below the guard
Delivery incl. scabbard
Weight: 1,3 kg (2 kg incl. scabbard)
Based on a historical original
Transport weight (gram): 3000 *
We do not sell this product to customers under the age of 18. Click here for more information on the European arms acts.
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Prevent rust and corrosion by oiling your weapons regularly. Remove rust easily with black sandpaper. Remove burrs with a whetstone. Make sure you have removed all burrs before using a battle-ready weapon, as they can cause wounds.
Maintenance & care
Just as with weaponry, you can care for your shoes and leatherware by applying a little Ballistol after cleaning. This prevents the leather from drying out.
Tip: How to adjust the finish of your armour and weaponry
Luxurious (polished)- polish the steel with metal polish or toothpaste. You can even give the item a mirror-like polish. Test on a small surface first!
Handmade (matte)- soak the steel in cola for 40 minutes to 20 hours. Check regularly and treat with black sandpaper.
Antique (patinated) leave the steel to rust for some time in a damp environment, preferably outside. Remove the red layer of rust, to reveal the corroded top layer.
Please note. After finishing the product yourself, the warranty and return right expire. Celtic WebMerchant is not responsible for the obtained result."
Packaged with 100% recycled material
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.